A complete programme of antiscalants, coagulants, biocides, membrane cleaners, pH adjustment chemicals, and oxygen scavengers for protecting and optimising all water treatment systems.
Genoasis supplies a targeted portfolio of water treatment chemicals formulated specifically for reverse osmosis membranes, cooling water circuits, boiler systems, and industrial effluent treatment. All formulations are tested for compatibility with leading membrane brands and comply with relevant safety and environmental standards.
Our technical team provides dosing guidance, system audit, and chemical optimisation services to ensure maximum membrane life, minimum fouling, and compliant discharge. Products are available in 25 L containers, 200 L drums, and 1000 L IBC totes for continuous dosing systems across operations of any scale.
Phosphonate and polymer-based antiscalant formulations for preventing carbonate, sulphate, silica, and fluoride scale on RO membranes. Compatible with all thin-film composite membranes; dosed at 2–5 ppm for maximum protection.
Inorganic coagulants (ferric sulphate, alum, PAC) and organic flocculants (cationic and anionic polyacrylamides) for turbidity removal, TSS reduction, and sludge conditioning in clarifiers and DAF systems.
Non-oxidising biocides (isothiazolone, DBNPA, glutaraldehyde) for microbiological control in RO feed water, cooling towers, and storage tanks. Oxidising biocides including sodium hypochlorite and chlorine dioxide solutions also available.
Acid and caustic membrane cleaning formulations for removing carbonate and metal oxide scale, biofilm, and organic foulants from RO and NF membranes. Citric acid, EDTA, SDS-based, and alkaline enzyme cleaner options available.
Technical-grade sulphuric acid, hydrochloric acid, caustic soda solution, and sodium bicarbonate for feed water pH correction ahead of RO systems and for conditioning effluent before discharge or biological treatment.
Sodium bisulphite, DEHA, and hydrazine-free oxygen scavengers for boiler feed water treatment and corrosion control. Film-forming corrosion inhibitors for cooling water circuits protect metal surfaces and extend equipment life.
High-activity formulations deliver superior performance at minimal treat rates, reducing chemical consumption costs and simplifying dosing system design.
All RO chemicals are tested for compatibility with TFC, CA, and PVDF membranes from major manufacturers, ensuring no adverse effects on membrane integrity or performance.
Environmentally responsible biodegradable antiscalant and biocide formulations are available for projects requiring minimal ecological impact and sustainable operation.
Our water treatment chemists provide dosing calculations, ROSA/Chem analysis, and on-site commissioning support to ensure optimal chemical programme performance.
Brackish water, seawater, and low-energy RO membrane elements that our antiscalants are formulated to protect.
View Range →pH meters, ORP meters, chlorine analysers, and TDS meters to monitor chemical dosing effectiveness.
View Range →UV systems, ozone generators, and chlorination equipment to complement chemical dosing programmes.
View Range →Pre-RO sediment and carbon filters that work in combination with chemical pre-treatment programmes.
View Range →We supply antiscalants (phosphonate and polymer-based), coagulants and flocculants (ferric sulphate, alum, PAC, polyacrylamide), non-oxidising biocides (isothiazolone, DBNPA, glutaraldehyde), membrane CIP cleaners (acid and alkaline), pH adjustment chemicals, and oxygen scavengers and corrosion inhibitors for boiler and cooling water systems.
For high-TDS borewell water in India (1,500–8,000 ppm TDS), we recommend a phosphonate or polymer antiscalant targeting carbonate, sulphate, and silica scale. Our technical team can run a scale prediction analysis from your water report and recommend the right product and dosing rate for your specific feed water chemistry and RO system recovery.
RO antiscalants are typically dosed at 2–5 ppm into the RO feed water. The exact dose depends on your feed water chemistry, system recovery rate, and scale-forming tendency. Our high-activity formulations deliver effective scale prevention at these low treat rates, keeping chemical running costs low.
Yes. We supply both acid CIP formulations (citric acid and HCl blends, EDTA-based) for carbonate and metal oxide scale removal, and alkaline CIP cleaners (caustic soda, SDS-based enzyme formulations) for biofilm and organic foulant removal from RO membranes. Available in 25 L, 200 L drum, and 1,000 L IBC.
Contact our team for pricing, availability, and technical specifications tailored to your requirements.