A complete programme of antiscalants, coagulants, biocides, membrane cleaners and corrosion inhibitors, together with UV, ozone and chlorination disinfection systems, for protecting and optimising RO, cooling and process water systems.
Genoasis supplies a targeted portfolio of water treatment chemicals formulated specifically for reverse osmosis membranes, cooling water circuits, boiler systems, and industrial effluent treatment. All formulations are tested for compatibility with leading membrane brands and comply with relevant safety and environmental standards.
Our technical team provides dosing guidance, system audit, and chemical optimisation services to ensure maximum membrane life, minimum fouling, and compliant discharge. Products are available in 25 L containers, 200 L drums, and 1000 L IBC totes for continuous dosing systems across operations of any scale.
We supply water treatment chemicals across Africa, including Nigeria, Kenya, South Africa, Ghana, Tanzania, and Ethiopia. Bulk IBC and drum shipments are consolidated with other water treatment components to reduce freight costs. Our technical team can advise on feed water chemistry and correct dosage for local water sources across all regions we serve.
Phosphonate and polymer-based antiscalant formulations for preventing carbonate, sulphate, silica, and fluoride scale on RO membranes. Compatible with all thin-film composite membranes; dosed at 2–5 ppm for maximum protection.
Inorganic coagulants (ferric sulphate, alum, PAC) and organic flocculants (cationic and anionic polyacrylamides) for turbidity removal, TSS reduction, and sludge conditioning in clarifiers and DAF systems.
Non-oxidising biocides (isothiazolone, DBNPA, glutaraldehyde) for microbiological control in RO feed water, cooling towers, and storage tanks. Oxidising biocides including sodium hypochlorite and chlorine dioxide solutions also available.
Acid and caustic membrane cleaning formulations for removing carbonate and metal oxide scale, biofilm, and organic foulants from RO and NF membranes. Citric acid, EDTA, SDS-based, and alkaline enzyme cleaner options available.
Technical-grade sulphuric acid, hydrochloric acid, caustic soda solution, and sodium bicarbonate for feed water pH correction ahead of RO systems and for conditioning effluent before discharge or biological treatment.
Sodium bisulphite, DEHA, and hydrazine-free oxygen scavengers for boiler feed water treatment and corrosion control. Film-forming corrosion inhibitors for cooling water circuits protect metal surfaces and extend equipment life.
Effective disinfection is critical to public health protection and process integrity in water treatment. Genoasis offers a comprehensive range of disinfection technologies to suit every application, budget, and regulatory requirement - from chemical-free UV and ozone systems through to economical chlorination and sodium hypochlorite dosing equipment.
All systems are supplied with automated control panels, flow-proportional dosing, residual monitoring capability, and comprehensive commissioning support. Our team assists with disinfection by-product (DBP) management and regulatory compliance for both drinking water and treated wastewater reuse applications.
Disinfection systems are supplied to water treatment projects across India, the Middle East, and Africa. In regions of Africa with limited access to liquid chlorine - particularly in inland areas of Nigeria, Kenya, Ethiopia, and Tanzania - we recommend UV or sodium hypochlorite on-site generation systems which eliminate the need for dangerous chlorine gas cylinders.
Low-pressure and medium-pressure UV disinfection reactors from 20 to 10,000 L/h for chemical-free inactivation of bacteria, viruses, and Cryptosporidium. NSF 55 certified units with automated lamp intensity monitoring and sleeve cleaning.
Corona discharge ozone generators from 5 g/h to 1 kg/h output for advanced oxidation, microbiological control, taste and odour removal, and colour reduction in water and wastewater treatment. Complete with contact vessels and off-gas destructors.
Gas chlorinators, chlorine cylinder scales, and vacuum-operated chlorine dosing systems for municipal water treatment and large-scale disinfection. Includes safety equipment, leak detection, and emergency shut-off systems.
Complete NaOCl dosing skids with peristaltic or diaphragm metering pumps, calibration cylinders, day tanks, and flow-proportional control for reliable automated chlorine residual maintenance in water distribution systems.
On-site chlorine dioxide generation systems for Legionella control, biofilm removal, and disinfection in cooling towers, hospital water systems, and process water circuits where chlorine residuals are undesirable.
On-site sodium hypochlorite generation by electrolysis of salt solution. Eliminates hazardous chemical transport and storage while producing a consistent, low-concentration NaOCl solution for dosing into water systems.
High-activity formulations deliver superior performance at minimal treat rates, reducing chemical consumption costs and simplifying dosing system design.
All RO chemicals are tested for compatibility with TFC, CA, and PVDF membranes from major manufacturers, ensuring no adverse effects on membrane integrity or performance.
Environmentally responsible biodegradable antiscalant and biocide formulations are available for projects requiring minimal ecological impact and sustainable operation.
Our water treatment chemists provide dosing calculations, ROSA/Chem analysis, and on-site commissioning support to ensure optimal chemical programme performance.
Brackish water, seawater, and low-energy RO membrane elements that our antiscalants are formulated to protect.
View Range →pH meters, ORP meters, chlorine analysers, and TDS meters to monitor chemical dosing effectiveness.
View Range →UV systems, ozone generators, and chlorination equipment to complement chemical dosing programmes.
View Range →Pre-RO sediment and carbon filters that work in combination with chemical pre-treatment programmes.
View Range →We supply antiscalants (phosphonate and polymer-based), coagulants and flocculants (ferric sulphate, alum, PAC, polyacrylamide), non-oxidising biocides (isothiazolone, DBNPA, glutaraldehyde), membrane CIP cleaners (acid and alkaline), pH adjustment chemicals, and oxygen scavengers and corrosion inhibitors for boiler and cooling water systems.
For high-TDS borewell water in India (1,500–8,000 ppm TDS), we recommend a phosphonate or polymer antiscalant targeting carbonate, sulphate, and silica scale. Our technical team can run a scale prediction analysis from your water report and recommend the right product and dosing rate for your specific feed water chemistry and RO system recovery.
RO antiscalants are typically dosed at 2–5 ppm into the RO feed water. The exact dose depends on your feed water chemistry, system recovery rate, and scale-forming tendency. Our high-activity formulations deliver effective scale prevention at these low treat rates, keeping chemical running costs low.
Yes. We supply both acid CIP formulations (citric acid and HCl blends, EDTA-based) for carbonate and metal oxide scale removal, and alkaline CIP cleaners (caustic soda, SDS-based enzyme formulations) for biofilm and organic foulant removal from RO membranes. Available in 25 L, 200 L drum, and 1,000 L IBC.
Yes. We supply antiscalants, coagulants, biocides, and CIP cleaners across Africa, including Nigeria, Kenya, South Africa, Ghana, Tanzania, and Ethiopia. Chemicals are shipped in drums or IBC totes via established freight lanes to African ports. Our technical team can recommend the correct antiscalant chemistry and dosing rate based on your local feed water analysis - contact us with your water report for a tailored recommendation.
Contact our team for pricing, availability, and technical specifications tailored to your requirements.